Publicité
Warning:
• Do not use the charger stand when the alkaline batteries is
depleted or no battery is installed.
• Disconnect the monitor from the patient and stop
monitoring before charge the battery.
• When connect the running monitor to the AC-DC adapter
to charge its battery, there will be a message displayed
on the screen, and the monitor will shut down after 10
seconds.
7.3 Charging the Lithium Ion Battery
Battery
charger
To charge the lithium ion battery:
1. Place the pulse monitor in the charger stand.
2. Connect the AC-DC adapter and plug the adapter into the AC mains.
3. The indicating lamp on the battery charger and the indicating lamp on the
monitor are on to indicate that the battery is in charge.
4. When the battery charging indicating lamp on the monitor turns off, the
battery is fully charged.
Handheld pulse
oximeter
Fig 7-4 Charging device
94
www.spengler.fr
AC/DC adapter
Publicité
