Spengler MASTER PALM 3 Manuel Utilisateur page 88

5.6.3 Adjusting the Alarm Limit
1. Select Menu Alarm Setup .
2. Adjust High :If the SpO
"SpO Too High" alarm will be triggered.
2
3. Adjust Low :If the SpO
"SpO Too Low" alarm will be triggered.
2
5.6.4 Setting Desat Limit
SpO desat means when SpO
2
high physiological alarm will be trigged. Its setting is as follows:
1. Select Menu System
window.
2. Input the password and select OK to enter the maintenance window. Select
Desat Limit , Then set its value through the Up and Down button.
measurement is higher than the high alarm limit, the
2
measurement is lower than the low alarm limit, the
2
measuring value is lower than the desat limit, a
2
Maintenance ,then pops up a password entering
88
www.spengler.fr