Publicité
Warning:
• Check the SpO
damage before use. Do not use the sensor if any damage
is detected.
• When disposing the disposable SpO
SpO
regulations that relate to the disposal of this products or
similar products.
Caution: In case it is necessary to add a clip to fix the
fingertip sensor, the cable instead of the sensor itself should
be clipped. Please note that the cable of sensor should not
be pulled with force.
Note:
• The pleth wave is not equal to the intensity of PR signal.
• The monitor does not provide automatic self-examination
alarm signal and the operator has to use SpO
self-examination.
5.3 Monitoring Procedure
1. Selecting SpO
Sensor
2
Depending on the patient category, weight and application site, you can select
the SpO
sensor as required.
2
2. Connecting SpO
2
Plug the SpO
sensor cable into the SpO2 connector on the measurement
2
module.
3. Applying SpO
Sensor
2
Clean the application site, such as colored nail polish, and apply the sensor to
the patient.
sensor and its package for any sign of
2
probe, please observe all local, state, and federal
2
Sensor
85
www.spengler.fr
probe or useless
2
simulator for
2
Publicité
