Publicité
3.12 Restoring the Factory Configuration
If you have changed the system's configuration and want to restore the factory
configuration, follow this procedure:
1. Select Menu
System .
2. Select Load Default Conf. , popping up a confirming window, select OK to
restore the factory configuration..
3.13 Shutting off the Monitor
Please follow the below steps to shut off the monitor:
1. Confirm that the patient monitoring is finished.
2. Disconnect the SpO
3. Press the power button and hold it for 2s to turn off the monitor.
Caution: Under the Spot-check mode, if the monitor is not
in use and there is no button operation for more than 5
minutes, the monitor will shut down automatically.
sensors form the monitor.
2
78
www.spengler.fr
Publicité
