Publicité
Appendix D Alarm Message
This section lists some important alarm message. In the tables below, "*" means
the alarm level is user-adjustable.
D.1 Physiological alarm
Messages
SpO
Too High*
2
SpO
Too Low*
2
SpO
Desat
2
PR Too High*
PR Too Low*
No Pulse
D.2 Technical alarm
Messages
Sensor Off
Battery Low
SpO
Low Perf
2
Made for Spengler by Guangdong Biolight Meditech
Co., Ltd.
No.2 Innovation First Road, Technical Innovation Coast, Hi-tech
Zone, Zhuhai, P.R.China
EC Representative
Shanghai International Holding Corp. GmbH (Europe)
Eiffestrasse 80, 20537, Hamburg, Germany
Cause
A measurement has risen above the high
alarm limit or fallen below the low alarm
limit.
SpO
measurement has fallen below the
2
SpO
desat limit.
2
A measurement has risen above the high
alarm limit or fallen below the low alarm
limit.
The pulse signal was too weak to be
analyzed.
Cause
The SpO
sensor detached the patient or
2
the monitor.
The battery power is low.
The signal detected is weak.
114
www.spengler.fr
Level
Medium
High
Medium
High
Level
Medium
Publicité
