Publicité
1/ Alarm indicating lamp
When an alarm occurs, this lamp will light up as defined below:
• High level alarm: the lamp quickly flashes red.
• Medium level alarm: the lamp slowly flashes yellow.
• Low level alarm: the lamp lights yellow without flashing.
2/ Display screen
3/ Left button
Press this button to:
• Enter the main menu under the monitoring screen.
• Select the highlighted menu item under the menu screen.
4/ Right button
Press this button to:
• Change the screen display among Big Numerics mode, SpO
under the monitoring screen.
• Exit current menu under the menu screen.
5/ Alarm pause button
• It's invalid to press this button when the alarm volume is off.
• It can pause the alarm for 120s when the alarm volume is on.
• It can change the alarm message to prompt message when "Lead off" or
"Sensor off" alarm happens.
6/ Power button
After the batteries are installed:
• Press this button to turn on the monitor.
• Press and hold it for 2 seconds to turn the monitor off.
7/ Up button
Press this button to:
• Raise the beat volume under the monitoring screen.
• Move the cursor upwards or increase the value of selected menu item under
the menu screen.
8/ Down button Press
this button to:
• Lower the beat volume under the monitoring screen.
• Move the cursor downwards or decrease the value of selected menu item.
9/ Battery charging indicating lamp
• Lights orange when the battery is being charged.
• Is shut off when the battery is fully charged or not being charged.
65
www.spengler.fr
waveform mode
2
Publicité
