Publicité
4.4 Alarm Status Symbol
indicates the alarm sound is turned off.
indicates the alarm sound is paused.
indicates individual measurement alarms are turned off.
4.5 Alarm Tone Configuration
4.5.1 Setting the minimum Alarm Volume
1. Select Menu
System
2. Select Min.Alm.Vol. and then select a value between 0 and 4.
4.5.2 Changing the Alarm Volume
1. Select Menu
General Setup .
2. Select Alarm Vol. and then select a value between X and 4. X is the minimum
volume which depends on the setting of the minimum alarm volume.
4.6 Pausing the Alarm Tones
Press the alarm pause button
And there will be alarm paused symbol and paused time shown in the alarm
status.
• The audible alarm is paused, but the alarm lamp remains lit and the alarm
message remains displayed;
• The remaining alarm pause time is displayed in the alarm status area;
• The symbol
is displayed in the alarm status area.
Audible alarm starts again automatically after the alarm pause period expires.
You can also press the
4.7 Setting the alarm silence
Press the alarm pause button
can restart the audible alarm by pressing this button again. During the alarm
silence, if there is a new alarm occurs, the monitor will restart the audible alarm.
This symbol
will be displayed on the screen upright the monitor.
Maintenance
enter the required password.
to keep the alarm paused for 120 seconds.
key to restart the audible alarm.
for 2 seconds to
82
www.spengler.fr
make the alarm silence. You
Publicité
