Publicité
seconds; subsequently, press the keys
simultaneously for a few seconds until the scroll bar (5)
lights up. Slide your finger along the entire bar (5) from left
to right. The two displays (3-FL) and (3-FR) will light up.
The Display (3-FL) indicates the parameter being modi-
fied.
Display (3-FR) indicates the set value.
To go to the Power Limitation management menu:
By default, accessing the parameters menu, the display (3-
FL) alternately shows the values
(9-FL) several times until the display (3-FL) shows the val-
ues
and
management menu).
Set Power limitation value:
press the key (9-FR) to select the desired value from the
three available, see table below:
Zone
3-FL
Saving settings:
To save the selected settings, press the key
alternately. (
Zone
3-FR
60
and
; press the key
and
= Power Limitation
Power
value (KW)
7.4
4.5
3.1
(12) +
(14)
(1)
Publicité
