Publicité
Activation:
Note: this timer can only be started if the cooking zone is
active with power other than zero.
After activating the desired cooking zone key (2),
the display (7a+7b) will activate and it will be possible to
program the timer. To increase or decrease the time use
the keys
(8a) and
(8b). The time is expressed in
minutes. If the timer reaches a time of less than 1 minute,
the count continues while displaying the seconds.
If desired, repeat the operation for several cooking zones:
Each cooking zone can have a different Timer set; the
countdown of the cooking zone selected at that moment
will appear on the display (7a+7b).
Note: After activating the Bridge zone, the timer on this
zone can also be started.
Deactivate :
To switch off the Timer in advance, select the cooking zone
key (2) and press key
(8a) until the timer reaches zero.
The time will deactivate.
● Power Limitation
The Power Limitation function allows the product to be
used while limiting its maximum absorption, adjusting the
absorbed power in all active cooking zones, ensuring that
the total absorbed power of the hob does not exceed the
set maximum absorption level.
The Power Limitation management menu is located inside
the Parameter management menu.
To enter the parameter management menu:
Disconnect the hob from the power supply, wait a few
seconds and reconnect the hob to the power supply. UN-
LOCK the hob by holding down the key
(11) for a few
59
Publicité
