Publicité
MONITOR FUNCTIONS
[SCAN]: If this function is selected, the current values of all functions ( Except LEVEL) are
displayed successively in a constant sequence approx. every 5 seconds.
[TIME]: The currently required time is displayed in minutes and seconds.
[SPEED]: The current speed is displayed in kilometres per hour.
[DISTANCE]: The current status of the travelled distance is displayed.
[CALORES]: The current status of the consumed calories is displayed.
[ODO]: The current status of the travelled kilometres of all previous training sessions
including current training session is displayed.
[RPM]: The current revolution per minute (RPM) is displayed.
[PULSE]: The current pulse rate is displayed in beats per minute.
[LEVEL]: The current level of the resistance is displayed.
KEYS
1. [Reset]
When this key is pressed briefly, the values chosen with the [Reset] key are reset to zero. If
the key is held longer (approx. 3 seconds), all last attained values are deleted. ODO will be
reset only when the batteries replaced.
2. [Mode]:
Pressing this key once briefly makes it possible to change from one function to another,
i.e. the respective functions can be selected for which entries can be made using the
[Mode] key. The currently selected function is indicated in the window.
3. [SET]:
By pressing this key once, it is possible to specify values step by step in the respective
functions. For this, the desired function must firstly be selected using the [SET] key.
Holding the key pressed activates faster running. When training begins, the specified
values are then counted down to zero.
Publicité
