Télécharger Imprimer la page

SKYLOTEC BEAMSTRAP Instructions D'utilisation page 67

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 74
emergency or sealed equipment) prior to each use. Repairs must
only be carried out by the manufacturer. Essential yearly inspections
and additional
checks following loading must be carried out by the manufacturer
or a trained approved person. The safety of the user is dependent
on the effectiveness and durability of the equipmentLet any
equipment that becomes wet, dry naturally, and do not directly
expose it to the effects of heat.
6.1) Hand wash up. 40° C (104 degrees F).
6.2) Dry and store at room temperature.
6.3) Store dry and protected from light.
6.4) Do not tumble dry or wash, do not bleach.
6.5) Do not contact with harsh substances.
6.6) Marking only permitted in the belt band.
Please contact the manufacturer if you have any doubt. If any faults
are picked up during inspection, the product must be replaced.
7.) Changes, Repairs
Any modifications or amendments must not be carried out by the
user, but exclusively by SKYLOTEC.
Any repair of damaged and/or defective components is prohibited!
11

Publicité

loading