Publicité
4
Blade Replacement
WARNING
• Always power off your GOAT before operation.
• Always wear protective gloves when replacing the Blades.
• Use only the Blades manufactured by ECOVACS and new screws when assembling the Blades.
• Wipe the unwashable components with a clean and dry cloth. Please do not use cleaning sprays or other detergents.
STEPS TO REPLACE THE BLADES
1. Power off GOAT.
2. Gently turn your GOAT over on a soft surface.
3. Loosen the Screws with a screwdriver.
4. Remove the Screws and the Blades.
5. Tighten the new Blades and the Screws.
6. Make sure that the Blades can spin freely.
31 EN
Publicité
