Publicité
All manuals and user guides at all-guides.com
Balkenmaeher_468426.book Seite 47 Mittwoch, 6. April 2016 3:14 15
• Store the product in a dry, well-ventilated
place.
Taking out of operation for a longer
period of time
Always remove fuel from the product before
storing for longer periods.
– Empty the tank.
– Start the motor and let it run until the it
switches off by itself.
– Lightly oil all moving parts.
Transportation in a vehicle
– Allow the product to cool down.
– Empty the tank.
Fault/malfunction
Motor does not start.
Motor running irregularly. Spark plug contaminated?
Excessive vibration.
If you can't fix the fault yourself, contact your
nearest vendor. Please be aware that any
Troubleshooting
If something doesn't work...
Malfunctions are often caused by minor
faults. You can easily remedy most of these
yourself. Please consult the following table
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
Cause
Tank empty?
Ignition cable connector loose?
Ignition cable connector contaminat-
ed?
Spark plug contaminated?
Spark plug defective?
Excess fuel in the combustion cham-
ber?
Distance from electrode to spark
plug too great?
Incorrect fuel?
Spark plug defective?
Engine oil level too low?
Distance from electrode to spark
plug too great?
Incorrect fuel?
V-Belts loose or torn out?
Loose parts or damaged screws?
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
– Secure the product to stop it slipping and
tipping over.
DANGER! Risk of injury! Improper
repairs can result in the product
functioning unsafely. This endangers
yourself and your environment.
Remedy
► Filling with fuel – p. 44
Push the connector firmly onto
the spark plug.
Clean connector.
► Cleaning/replacing the
spark plug – p. 46
Replace spark plug.
Motor starts several times
without pressing the choke
(Position [
If the motor will not start: Take
out the spark plug and dry the
electrode.
Set gap at 0.7–0.8 mm.
Drain tank and fill up with the
correct fuel.
► Cleaning/replacing the
spark plug – p. 46
► Checking the motor oil lev-
el – p. 46
► Cleaning/replacing the
spark plug – p. 46
Set gap at 0.6–0.8 mm.
Empty tank and fill up with the
correct fuel.
Contact your local vendor.
Contact your local vendor.
GB
]).
47
Publicité
