Publicité
Controller
CONTROL PANEL
Power ON/Off/Pause Controller:
1. Press button to power controller ON.
2. Single press while on = PAUSE FUNCTION
3. Long press while on = Power OFF
Pause Function:
The grill is equipped with a PAUSE function to better help maintain set temperatures when the lid is opened.
• When cooking at temperatures over 260
opening your grill lid.
• The pause function will stop the fan to ensure there is not a spike in temperature when opening the lid.
• To engage the PAUSE function, press the power button (the controller will display HOLD).
• To resume to normal temperature maintenance and to reactivate the fan, press the power button again.
Set Temperature:
1. Press button.
2. Turn knob to desired temperature.
3. Press button again to set temperature
(Temperature will automatically set after 3 seconds.)
Set Time:
• Countdown Timer
1. Press button.
2. Turn knob to desired hours.
3. Press button to set hours.
4. Turn knob to desired minutes.
5. Press button to set minutes. The timer will start.
6. Press button to pause and resume timer.
7. Press and hold button to reset timer.
Set Meat Probe Temperatures:
1. Press button and turn knob to select meat probe (MP1, MP2, MP3, MP4). Press button again.
2. Press temperature button.
3. Turn knob to desired temperature.
4. Press temperature button again to set the temperature.
(If meat probe reaches 300°F, an alarm will sound and the meat probe must be removed from heat and given
time to cool. Meat probe will be damaged if left at this temperature.)
* NOTE: Meat probe icon will flash while in setting mode.
5. Once set temperature is reached, alarm will sound. Press any button to clear.
Viewing Information on Display:
• Turning the knob will advance the display through grill temperature, timer and meat probes; MP1, MP2, MP3
and MP4.
Meat
Probe
Jacks
500
) ensure the PAUSE function is enabled BEFORE
°C (
°F
Set Temperature From Fº to Cº :
1. With power off, hold set temp
button
2. Press power button
• Count Up Timer
1. Press and hold button.
2. Timer will begin counting up from 00:00.
Timer will count by Minutes:Seconds and
then Hours:Minutes.
3. Press button to pause and resume timer.
4. Press and hold button to reset timer.
3. Unit powers up with "F" or
"C" flashing on display
4. Use knob to select temp unit
5. Press set temp to confirm
27
Publicité
