A SIP ATA (Analog Terminal Adapter) receiver is a device through which an analogue telephone can interoperate with the XIP video-entry system. It supports the SIP protocol
and can register with the ETI/SER.
Under [SIP ATA interfaces], assign a password to SIP ATA receivers.
Press the pencil corresponding to the relevant device to open the [Edit credentials] window.
Credentials
General information
Porters
Device data
Network
Date and time
VoIP settings
Access control
Video entry system
Remaining licences: 3
Credentials
Forwards and diversions
Licences
Maintenance
Diagnosis
Assign a password to the device and confirm.
The default settings do not require a password.
The SIP account and password (where applicable) must then be configured on the ATA device
used for the selected unit.
Enable or disable the selected receiver. Each enabled receiver is paired with an available
14
licence.
SIP gateway interfaces
A SIP Gateway receiver is a device through which a telephone user (on a public network or PBX, analogue or GSM or VoIP control unit) can interoperate with the XIP video
entry system. It supports the SIP protocol and can register with the ETI/SER.
Under [SIP gateway interfaces], assign a password to SIP Gateway receivers.
Press the pencil corresponding to the relevant device to open the [Edit credentials] window.
Credentials
General information
Porters
Device data
Network
Expand
Date and time
VoIP settings
Access control
Video entry system
Credentials
Forwards and diversions
Remaining licences: 3
Licences
Maintenance
Diagnosis
Assign a password to the device and confirm.
The default settings do not require a password.
The SIP account and password (where applicable) must then be configured on the SIP