Publicité
Once the slave setup is complete, the communication status, slave device description and IP address will be displayed.
The status can be [Offline] i.e. not connected or connecting (connection may take a moment depending on system complexity) or [Online] i.e. connected and fully functional.
4
Video entry system
General information
Device mode
Device data
Network
Date and time
VoIP settings
Access control
Video entry system
Credentials
Forwards and diversions
Licences
Maintenance
Diagnosis
Once all slaves in the system have been added, one of them (the one with the [Backup] box flagged) can be set to back up the ETI/SER XIP master continuously.
5
Assign a port (20050 to 20166).
If the ETI/SER XIP master fails, it will be replaced by the ETI-XIP slave with backup flagged, and the remaining slaves will communicate with it via the assigned
2
port. The port is also marked
in the [Device mode] section.
The ETI-XIP gateway replacing the ETI/SER XIP server in the event of a failure will only be able to guarantee basic video-entry and access-control system
functions.
Video entry system
General information
Device mode
Device data
Network
Date and time
VoIP settings
Access control
Video entry system
Credentials
Forwards and diversions
Licences
Maintenance
Diagnosis
Slaves
Multiserver
Passages and video cameras
Status
Description
Add new slave
Slaves
Multiserver
Passages and video cameras
Status
Description
Add new slave
IP address
Save
Reload
IP address
Save
Reload
User
Backup
Delete
User
Backup
Delete
Publicité
