Publicité
VoIP settings
General settings
Under [VoIP settings] in the [General settings] tab, set the ring time after which the called user will be considered absent and the call will be terminated automatically.
Set the ring time after which the called user will be considered absent and call diversion will be activated.
Set the maximum time allowed for the IntercomView application to attempt to connect to the system before notifying that the time has expired.
The ring time must be longer than the ring time with diversion.
Once you have finished, press [Save].
VoIP settings
General information
General settings
Device data
Network
Ring time in seconds
Date and time
VoIP settings
Ring time with diversion in seconds
Access control
Porter registration timeout in seconds
Video entry system
Credentials
Forwards and diversions
Licences
Maintenance
Diagnosis
DTMF command codes
Under [DTMF command Codes], change the codes for sending commands during a conversation. XIP entry panels are interoperable with telephone devices or third-party
VoIP telephones. In the case of active communication between them, the Door release, AUX1 and AUX2 commands can be activated via DTMF, i.e. by sequences of digits
entered on the telephone terminal keypad. These codes are configurable in the mask.
The code must be made up of an asterisk followed by one to four digits.
Once you have finished, press [Save].
VoIP settings
General information
General settings
Device data
Network
Date and time
VoIP settings
Access control
Video entry system
Credentials
Forwards and diversions
Licences
Maintenance
Diagnosis
DTMF command codes
DTMF command codes
2
Save
Reload
1
Save
Reload
1
3
User
User
Publicité
