Timberwolf TW 230VTR Manuel Opérateur page 56

SERVICE INSTRUCTIONS
SERVICE SCHEDULE
SERVICE SCHEDULE
Check water.
Check radiator is clear.
Check engine oil ‐ top up if necessary (10W‐30).
Check for engine oil / hydraulic oil leaks.
Check fuel level.
Check feed funnel, feed roller cover, access covers,
engine covers and discharge unit are securely fitted.
Check blades
Clean air filter element.
Lubricate variable track base slides.
Check safety bar mechanism.
Check for tightness all nuts, bolts and fastenings
making sure nothing has worked loose.
Grease discharge flange.
Check tension of main drive belts (and tension if
necessary).
Grease the roller box slides.
Grease the roller spline and bearing.
Check anvils for wear.
Check fuel pipes and clamp bands.
Check battery electrolyte level.
Check for loose electrical wiring.
Replace hydraulic oil filter ‐ every year or 100 hours
after service or repair work to the hydraulic system.
Replace hydraulic oil.
Replace fuel pipes and clamp bands.
Check coolant.
Change engine oil.
Replace engine oil filter cartridge.
Check valve clearance.
Replace anvils when worn.
C190‐0114
15 / 64
Daily 50
Check Hours
ü
ü
ü
ü
ü
ü
ü
DEPENDING ON WORKING ENVIRONMENT
WEEKLY, DEPENDING ON WORKING ENVIRONMENT
ü
ü
ü
ü
ü
OR AS REQUIRED ‐ SEE PAGE 21
ü
OR AS REQUIRED ‐ SEE PAGE 21
ü
REFER TO YOUR ENGINE SUPPLIERS MANUAL
RETURN TO DEALER FOR ANVIL CHANGE
26.06.2018
TW 230VTR
100 500
Hours Hours
ü
ü
ü
ü
OR
ü
OR
1
Year
ü
ü
Rev: 2.0