Timberwolf TW 230VTR Manuel Opérateur page 47

SAFE WORKING
GENERAL SAFETY MATTERS
• DO NOT operate chipper unless available light is
sufficient to see clearly.
• DO NOT use or attempt to start the chipper without
the feed funnel, guards and discharge unit securely in
place.
• DO NOT stand directly in front of the
feed funnel when using the chipper.
Stand to one side.
• DO NOT smoke when refuelling.
• DO NOT let anyone who has not received
instruction operate the machine.
• DO NOT climb on the machine at any time.
• DO NOT handle material that is partially engaged in
the machine.
• DO NOT touch any exposed wiring while the machine
is running.
• DO NOT use the chipper inside buildings.
NOISE TEST
Machine: TW 230VTR
Notes: Tested chipping 120mm x 120mm corsican pine 1.5m in length
Noise levels above 80dB (A) will be
experienced at the working position.
Prolonged exposure to loud noise may cause
permanent hearing loss. All persons within a
4 metre radius must also wear good quality
ear protection (EN 352) at all times to
prevent possible damage to hearing.
Guaranteed Sound
Power: 120dB (A)
As required by Annex III of Directive
2000/14/EC "Noise Emission in the
environment by equipment for use outdoors".
Tested according to BS EN ISO 3744:2010.
C190‐0114
6 / 64
DO NOT ALLOW
THE FOLLOWING
TO ENTER THE
MACHINE, AS
STONES
BRICKS
95.2 dB
101.5 dB
R= 4 metres
96.6 dB
R= 10 metres
26.06.2018
DAMAGE IS
LIKELY
CLOTH
METAL GLASS
STRING ROOTS
93.3 dB
96.8 dB
96.3 dB
TW 230VTR
PLASTIC
RUBBER
BEDDING
PLANTS
Rev: 2.0