Publicité
HTB200PP_DVQX2752ZAX1.book Page 14 Friday, August 2, 2024 3:03 PM
Remote control code
When other Panasonic equipment responds to the
remote control of this system, change the remote
control code for this system.
Preparation
Turn off all other Panasonic products.
•
Turn on this system.
•
Aim the remote control at the remote control
•
sensor of this system.
To set the code to code 2
█
Press and hold [
-PAIRING] and [SOUND] on
the remote control for a minimum of
4 seconds.
MUSIC
CINEMA HDMI(ARC) OPTICAL
To set the code to code 1
█
Press and hold [
-PAIRING] and [DIMMER] on
the remote control for a minimum of
4 seconds.
MUSIC
CINEMA HDMI(ARC) OPTICAL
System memory reset
Reset the memory when the following situations
occur:
There is no response when buttons are pressed.
•
You want to clear and reset the memory
•
contents.
Press and hold [1] on the unit for a minimum
of 4 seconds.
All the indicators blink until the system restarts.
Note:
The remote control code will set back to code 1 after memory
reset, refer to "Remote control code" on how to change to
code 2.
14
14
Unit care
Disconnect the AC power supply cord before
maintenance. Clean this system with a soft, dry
cloth.
When dirt is heavy, wring a cloth moistened in
•
water tightly to wipe the dirt, and then wipe it
with a dry cloth.
When cleaning the speakers, use a fine cloth.
•
Do not use tissues or other materials (towels,
etc.) that can fall apart. Small grains may get
stuck inside the speaker cover.
Never use alcohol, paint thinner or benzine to
•
clean this system.
Before using chemically treated cloth, read the
•
instructions that came with the cloth carefully.
To dispose or transfer this system
This system may keep the user settings
information in the unit. If you discard the unit either
by disposal or transfer, then follow the procedure
to return all the settings to the factory presets to
delete the user settings.
(
left)
The operation history may be recorded in the
•
memory of the unit.
Software update
Occasionally, Panasonic may release updated
software for this unit that may add or improve the
way a feature operates. These updates are
available free of charge. For more details, refer
to the following website.
https://panasonic.jp/support/global/cs/
(This site is in English only.)
Publicité
