Publicité
HTB200PP_DVQX2752ZAX1.book Page 10 Friday, August 2, 2024 3:03 PM
Bluetooth
connection
®
You can connect and play an audio device
wirelessly through Bluetooth
Preparation
Turn on the unit.
•
Turn on the Bluetooth
•
place the device near the system.
Read the operating instructions of the device for
•
details.
Pairing a device
█
Preparation
If this system is connected to a Bluetooth
disconnect it (
below).
1
Press [
-PAIRING].
If the "
" indicator blinks quickly, continue with
step 3.
2
Press and hold [
indicator blinks quickly.
If the "
" indicator blinks slowly, repeat this
step.
3
Select "SC-HTB200" from the Bluetooth
menu of the device.
The MAC address (e.g., 6C:5A:B5:B3:1D:0F)
may be shown before "SC-HTB200" is shown.
If prompted for a passkey, input "0000" or
"1234".
Once the Bluetooth
"
" indicator stops blinking and lights up.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used the longest will be
replaced.
Connecting a paired device
█
Preparation
If this system is connected to a Bluetooth
disconnect it (
below).
1
Press [
-PAIRING].
2
Select "SC-HTB200" from the Bluetooth
menu of the device.
Disconnecting a device
█
Press and hold [
-PAIRING] until the "
indicator blinks slowly.
Note:
•
This system can only connect to one device at a time.
•
When "
" is selected as the source, this system will
automatically try to connect to the last connected device.
•
The Bluetooth
device will be disconnected when you select
®
another source.
10
10
.
®
feature on the device and
®
device,
®
-PAIRING] until the "
"
®
device is connected, the
®
device,
®
®
"
Basic controls
Preparation
Turn on the TV and/or connected device.
1
Press [`] to turn on the system.
2
Select the source.
HDMI: Press [HDMI (ARC)] on the remote
control or [INPUT] on the unit.
OPTICAL: Press [OPTICAL] on the remote
control or [INPUT] on the unit.
(Bluetooth
): Press [
®
remote control or [
unit.
3
Press [+ VOL ‒] to adjust the volume of the
system.
Volume range: 0 to 100
The indicators will scroll every time you adjust
the volume, and stop blinking when reached
the minimum or maximum level.
MUSIC
CINEMA HDMI(ARC) OPTICAL
When "
" is selected as the source
Select this system as the output speaker from the
menu of the connected Bluetooth
When "OPTICAL" is selected as the source
On the TV and the connected device, select the
TV's input for this system and starts playback on
the connected device.
To select the sound mode
█
Press [SOUND].
Sound mode
Standard
Best suited for dramas and comedy
shows.
Music
Enhance the sound of musical
instruments and songs.
Cinema (default)
Produces three-dimensional sound
unique to movies.
To mute the sound
█
Press [MUTE].
All indicators blinks simultaneously.
To cancel, press [MUTE] again or adjust the
volume.
-PAIRING] on the
] on the
device.
®
Indication
MUSIC
CINEMA
MUSIC
CINEMA
MUSIC
CINEMA
Publicité
