MSW Motor Technics S-POWER MPPT 5000 Manuel D'utilisation page 60

EN
Battery type BAT
（ ）
Figure 1-28 battery type setting page
Function Description: battery type setting function. Setting conditions: all States can be set.
explain:
BAT:Battery Type
Four battery type settings: AGM (lead-acid battery) is the default setting; The second is FLD (water
injection battery); The third is lib (lithium battery); The fourth is cus (customer setting type)
Battery low voltage point bAL
（ ）
Figure 1-29 battery low voltage point setting page
Function Description: low voltage alarm point setting. Setting conditions: all States can be set.
explain:
bAL:battery Low
It cannot be set when the battery definition mode is AGM (lead-acid battery type) or FLD (water
injection battery type). The initial default setting of 3k-vml-24v is 21.6v
5k-vmh-48v is initially set to 44V by default