Publicité
3.6
function setting operation
function setting and operation of product:
Enter the exit function setting page and function setting. The specific operations are as follows :
press the function setting key No. 4 (three key screen: No. 3 key) for more than 2 seconds to enter
the function setting page. Press the query key No. 2 or no. 3 (three key screen: No. 2 key) for 0.1 to
2 seconds to select the function. After turning the page to the required function setting page, the
words of the corresponding function flash
press the confirmation key and key 4 (three key screen: key 3) for 0.1 to 2 seconds to enter the
setting page of the
selected function. At this time, the words of the selected function are on for a long time,
and the value flashes to the left of the words of the selected function. Press the query key
No. 2 or no. 3 for 0.1 to 2 seconds (three key screen: No. 2 key) to select the value of the
required functional parameters .
after turning the page to the function parameters to be selected, press the confirmation key and the
No. 4 key for 0.1 to
2 seconds (three key screen: No. 3 key), and the function setting is completed. At this time,
the value of the function parameters will be on for a long time and no longer flash .
Press the No. 1 key for more than 0.1 to 2 seconds before the function can be set successfully. At the
same time, exit the function setting page and return to the main display page (or do not operate.
Wait for up to 30s and automatically jump back to the main display page) .
Output voltage (OPU)
The default value of output voltage is 230V, 208v, 220V, 230V and 240V. All working conditions can
be set and take effect immediately
Press the function setting key 4 for more than 2 seconds to enter the function setting page. Press
the query key 2 or 3
(three key screen: Key 2) for 0.1 to 2 seconds to select the function. After turning the page
to the output voltage OPU setting page, the word OPU flashe.
Press the confirmation key and key 4 (three key screen: key 3) for 0.1 to 2 seconds to enter the setting
EN
.
Figure 1-12 output voltage setting page
.
Publicité
