MSW Motor Technics S-POWER MPPT 5000 Manuel D'utilisation page 44

3.1 Power ON/OFF
Once the unit has been properly installed and the batteries are connected well, simply press
On/Off switch (located on the button of the case) to turn on the unit.
3.2 Operation and Display Panel
The operation and display panel, shown in below chart, is on the front panel of the product.lt
includes three indicators, four function keys and a LCD display, indicating the operating status
and input/output power information.
Four button function
Function setting
/ OK key
Page turning
/ query key
LED Indicator function
Figure 1-2 four key LCD interface display
Key
Function setting: press key 4 of function setting on the display page for more
than 2 seconds to enter the function setting page. After entering the setting
interface, press key 2 or 3 to turn the page up and down to select the interface
to be set;
OK: on the function setting page, press key 1 for 0.1 to 2 seconds
to determine the set options。
Page turning: press key 2 or 3 on any page for more than 0.1 seconds to turn left or
right。
EN
Figure 1-1
Function description