Publicité
2.3 Mounting the Unit
Consider the following points before selecting where to install:
•
Do not mount the product on flammable construction materials.
Mount on a solid surface
•
•
Install this product at eye level in order to allow the LCD display to be read at all times.
For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side
•
and approx. 50 cm above and below the unit.
•
The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
•
The recommended installation position is to be adhered to the wall vertically.
Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient
•
heat dissipation and to have enough space for removing wires.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY
2.4 Final Assembly
After connecting all wirings, please put bottom cover back by screwing two screws as shown below.
After connecting all wirings, please put bottom cover back by screwing two screws as shown below.
EN
Publicité
