Publicité
7. UKCA/CE mark / UKCA/CE declaration of conformity
Albert Kerbl GmbH hereby declares that the product/device described in these instructions complies with the fundamen-
tal requirements and other relevant stipulations and directives.
The UKCA mark confirms compliance with the Directives of the European Union or the relevant UK legislation.
The CE mark confirms compliance with the Directives of the European Union.
9. Electrical waste
It is up to the operator to dispose of the product responsibly after its useful life. Comply with the relevant re-
gulations for your country. The device must not be disposed of in household waste. Under the terms of the
EU Directive on the disposal of old electrical and electronic equipment, the device can be taken to local au-
thority-run refuse sites or recycling plants free of charge, or returned to dealers who offer a returns service.
Correct disposal protects the environment and prevents any possible harmful impacts on humans and the en-
vironment.
Control card
Serial number
Check
Perfect working
order
Cable resistance
in Ohm
Insulation resistance
in MOhm
Installation loca-
tion (address +
description)
Installation date
Name, address
and signature of
the installation
specialist
(stamp +
signature)
Ensure that this card is completed and signed by an authorised electrician, and keep it in a safe place.
Before installation
34
After installation but before
connection to the power
supply
Publicité
