Publicité
- Trim the young hedge plants to the desired shape. The main shoot should not be damaged until the
hedge has reached the desired height. All other shoots can be cut in half.
- Dispose of cuttings in a professional and environmentally friendly manner.
- Cutting times:
⬧Deciduous hedges: June + October
⬧Coniferous hedges: April and August
⬧Fast-growing hedges ( e.g. conifers): from May approximately every 6 weeks
- Caution:
Watch out for nesting birds in the hedge. Only prune after the nesting or avoid this area
of the hedge.
37. Maintenance and care
Attention: Before carrying out any work on the power tool, remove the battery from the device.
Sharp cutting blades ➔Wear protective gloves!
Do not use water or liquid cleaning agents.
- Clean the hedge trimmer after each use with a dry cloth or, if it is very dirty, with a brush.
- Never spray the hedge trimmer with water.
- Keep the contacts of the battery and the device clean and dust-free.
- Clean the cutting blade after each use. Remove dirt, leaf residue, etc.
- Spray the cutting blade with maintenance oil after use to ensure a long service life of the hedge
trimmer. Use environmentally friendly products if possible.
Lubricants, e.g. service sprays.
- To oil the hedge trimmer, lay it on its side and apply a thin film of oil to the cutting blade.
Manual_FX-E1HH20_Int24_rev1
63
Publicité
