Publicité
Turn the device on/off
Insert the battery into the rail provided. Then press the safety button (Figure 1, point 6) on the side;
only then can you operate the on/off switch (Figure 1, point 7). The device will now start. If you
release the on/off switch, the device will stop working. Caution: The cutting tool may continue to run
slightly.
36. Work instructions
-
Hold the device firmly with both hands using the handles provided.
- The hedge trimmer can be moved forwards thanks to its double-sided cutting blades
and backwards or with a pendulum movement from one side to the other.
-
Trim the sides of the hedge first and then the top edge.
- Cut the hedge from bottom to top.
- Hold the hedge trimmer at an angle of 5-10° to the hedge to ensure a straight cut.
-
Cut the hedge in a trapezoidal shape. This prevents the lower part of the hedge from discolouring
due to a lack of light.
-
Trim the upper edges of the hedge slightly round.
- Cut in several passes if heavy pruning is necessary.
-
If necessary, stretch a guideline if you want to cut the hedge evenly.
Manual_FX-E1HH20_Int24_rev1
62
Publicité
