Télécharger Imprimer la page

FUXTEC FX-E1HH20 Mode D'emploi page 58

Masquer les pouces Voir aussi pour FX-E1HH20:

Publicité

- Always switch off the hedge trimmer when transporting it to another work site.
- Never hold the hedge trimmer by the cutting blade.
- Ensure that all guards and handles are fitted when using the appliance. Never attempt to operate
an incompletely assembled appliance or an appliance with unauthorized
modifications into operation.
-
Only operate the device in the conditions specified and supplied by the manufacturer.
technical condition. Unauthorized modifications to the device exclude the manufacturer's liability for
resulting damage.
- Spare parts must meet the requirements specified by the manufacturer. Therefore, only use original
spare parts or spare parts approved by the manufacturer. When replacing, please follow the
installation instructions provided and remove the battery beforehand.
- Have repairs carried out only by a qualified specialist or a specialist workshop.
After the mission
-
Turn off the device, remove the battery and then place the device in a safe place.
- Do not store the device within reach of children.
- Make sure that the ventilation slots of the device are free from dirt.
- Spare parts must comply with the requirements specified by the manufacturer.
Therefore, only use original spare parts or spare parts approved by the manufacturer. When
replacing, please follow the installation instructions provided and remove the
battery.
- Have repairs carried out only by a qualified specialist or a specialist workshop.
33. Safety instructions for the charger
-
Keep the charger away from rain or moisture. Water entering a charger increases the risk of electric
shock.
- Keep the charger clean. Dirty chargers can cause electric shock.
- Check the charger, cable and plug before each use. Do not use the charger if you notice any
damage. Do not open the charger yourself and have it repaired only by qualified personnel and only
using original spare parts.
Damaged chargers, cables and plugs increase the risk of electric shock.
- Do not place objects on the charger or place it on soft surfaces. There is a risk of fire.
- Always check that the mains voltage corresponds to the voltage indicated on the charger's rating
plate.
Manual_FX-E1HH20_Int24_rev1
58

Publicité

loading