Publicité
ENGLISH
Consumption values
Program duration are approximate and will vary with options selected. If the sensor detects the water is not hot
enough, the timer will be delayed to allow the water to heat up for the main wash of all cycles. Consumption
under standard conditions is given below.
Program
60'
1) The duration varies depending on the turbidity of the water.
Note: The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
Functions
Functions can add enhancements to the cycle selected. When a function is selected, the corresponding light
turns on.
Symbol
Functions
Sanitize
Extra Dry
Auto Door Open
Controls and indicators
Symbol
Name
Power button
Delay button
Start/Reset button
Rinse Aid
Water
3.8-5.6 gal (14.3-21.3 L)
2.9-5.6 gal (10.8-21.3 L)
5.6 gal (21.3 L)
4.7 gal (17.8 L)
3.8 gal (14.3 L)
1.9 gal (7.3 L)
Use to sanitize your dishes and glassware. When the Sanitize function is
selected, the water temperature is maintained at a maximum of 156.2°F
(73°C). The maximum temperature may not be reached if the incoming
water temperature is not hot enough (should be within 120.2-140°F/49-
60°C).
Note: Certified residential dishwashers are not intended for licensed food
establishments.
Higher temperature during the drying process.
After washing, the door will open automatically for better drying results.
Press this button for 3 seconds to switch your dishwasher on or off.
Press to delay the start of the selected wash cycle up to 24 hours.
(Adjustable from 1,2,3...8,12,16,20,24H)
Press to start or cancel a Program.
If the rinse aid is low, the Rinse Aid indicator will illuminate indicating
that it is time to refill.
Duration (min)
(with Auto Door Open)
152
1)
146
160
105
60
20
Description
Description
Duration (min)
(without Auto Door Open)
149
1)
144
157
109
60
20
9
Publicité
