Publicité
approach the weeds to be cut from your right to your left side. If an object or stick of wood
is hit unexpectedly, this can reduce a cutter blade kick-back.
25. Notes on working with the metal blade
A metal blade with 3 teeth is delivered with the device. It is used for cutting bushes and weeds. The
use of a saw blade with this device is prohibited.
WARNING
Do not cut with blunt, cracked or damaged metal sheets.
Before working, check the surface for obstacles such as stones, metal bars or other objects. If
they cannot be removed,
mark this position to avoid collision with the
blade. Lines can become entangled on the blade head and flap or be swirled in the air.
WARNING
Do not use the motor scythe for cutting out trees.
WARNING
Always use the shoulder strap. Adjust and fix the belt and belt clamping plate on the device so
that the device hangs a few cm above
the ground. The cut-out head and the protective shield should be aligned horizontally in all
directions. Pre-tension the devices on the right side of your body.
WARNING
Also, wear head, eye, face and hearing protection and safety shoes. Do not wear rings,
jewellery or
loose, dangling clothes that could get caught in the device.
Do not wear footwear with unprotected toes, and do not work
barefoot or without leg protection. In certain situations, you
must wear head protection.
26. Putting on the shoulder harness
Manual_FX-MS125_Int24_Rev1
DANGER
DANGER
DANGER
DANGER
48
Publicité
