Publicité
Important: The shoulder strap is an optional accessory
from FUXTEC, which we recommend for use with any brush cutter job. You can find the shoulder
strap at www.fuxtec.de via the following item number: FX-PS152TG
Do not allow anyone to enter the DANGER ZONE while working. The DANGER ZONE is an area of 15
meters in radius (approximately 16 steps). Insist that people in the DANGER ZONE wear eye
protection against flinging objects. If the device must be used where people are unprotected, work
at a low, reduced speed to reduce the risk of skidding.
Manual_FX-MS125_Int24_Rev1
The shoulder strap is equipped with a quick-release
device (see picture). You can quickly remove the
shoulder strap by pulling on the quick-release
device.
Read the manual carefully. Be thoroughly familiar
with the control and correct use of the device.
Understand how to stop and shut down the device.
Understand how to release a clamped attachment
quickly.
49
Publicité
