Place the fastening disc (3) on the shaft.
-
Use the Allen key (1) to lock the scythe head. If necessary, turn the fastening disc (3) slightly.
-
Screw the thread spool (2) onto the shaft by turning it anticlockwise.
-
Now tighten the thread spool by hand.
-
Remove the Allen key and check the smooth running of the thread spool.
-
Warning!
Ensure that all components are correctly assembled and installed and that all screws are tightened.
FUEL AND 2-STROKE OIL
Use unleaded petrol with 2-stroke engine oil in a 40:1 ratio.
Manual_FX-MS125_Int24_Rev1
53