2. Difficulties during operation
Situation
Cause
Choke is in "COLD START" position, the exhaust
system is blocked no air supply, moving elements
The engine does not
worn, ignition spark weak too large valve clearance,
reach the speed
cylinder head sooty
Operating materials
Lines to carburetor blocked Spark plug spacing
are leaking
incorrect
Motor-
Wrong choke position,
Noises
Camshaft damaged
Failure of the check valve on the tank cap
Carburetor leaking
Carburetor gasket is worn out
If no troubleshooting solves the problem, please contact the FUXTEC customer service. Only
use original parts approved by the manufacturer. Otherwise, there is a risk of danger.
36. Customer Service
Have your purchased device repaired only by qualified personnel and only with original spare parts. This
will ensure that the safety of the device is maintained.
Please contact the manufacturer FUXTEC GmbH directly at
maintenance work and the procurement of spare parts.
37. Warranty
The warranty period is 24 months from the date of purchase. Please keep your proof of purchase in a safe
place. Excluded from the warranty are wearing parts and damage caused by improper use, use of force,
technical modifications, use of incorrect accessories or non-original spare parts, and repair attempts by
non-qualified personnel. Warranty repairs may only be carried out by authorized specialist dealers.
38. Disposal note
Please contact your local municipality for the disposal of the device. Please dispose of all operating
materials such as petrol and oil in advance.
Manual_FX-MS125_Int24_Rev1
65
Solution
Open choke, replace exhaust system Check or
replace ignition coil, adjust flywheel, spark
plug
Replace lines and carburetor Adjust gap
dimension
Check/replace camshaft
Replace the fuel filler cap
Replace carburetor or gasket
at any time regarding
www.fuxtec.co.uk