Publicité
The first thirty minutes after power on is for pre-heating, please don't perform weighing during that
time.
For the SBS-PF-A150/20 and SBS-BW-1T/60*80 scale models, the connection between the scale head
and the scale platform is wireless. The communication between the head and the platform is being
established right after switching on the scale head and the scale platform. The scale platform is
equipped with three control lights:
•
AC – means that the storage battery of the platform is charging (AC power is connected)
•
Low Voltage – means that the platform storage battery needs to be charged.
•
SIGNAL – after proper wireless connection between the scale head and the scale platform
this light will be blinking.
If the scale display will show „Err24", it means that there is wireless connection error (the platform is off or
the platform storage battery needs to be charged).
3.4.
Device use
OPERATION
Weighing:
After preheating and the weight window displays zero, the scale is ready for weighing.
Note:
Do not weigh goods over the max capacity. Once overload (weight window displays „OL"/ „Ed", and the
buzzer gives consecutive sound), please remove the goods immediately to avoid unexpected damage.
Entering the unit price:
a) Input the unit price with ten number keys from 0 to 9 before or after loading.
b) The interval between one number and the next of the same unit price should not more than
about six seconds (if over six seconds, the system will clear the previous value automatically)
c)
If the weight window displays negative value (e.g. Negative tare weight), the amount window will
display "-------------", which indicates no amount.
d) If the amount window displays"--------------", it indicates that the accumulation sum is over
9999.99 (EUR or USD).
TARE
When weighing bulk goods, put the container on the scale pan, then press key [TARE] and wait for the
weight window displays "000.00", indicating that the scale is ready for weighing. Put the goods into the
container, and the weight window will display the net weight value. Note: tare weight + net weight <max
capacity.
Adding:
When a customer buys many goods with different prices, this scale can add amount one by one and get
the total amount. For example:
1) Put the goods A on the scale pan, the weight window will display "15.00" (kg). Input the unit price
"5.00" (EUR or USD)/kg, the amount window will display "75.00" (EUR or USD);
2) Press key [ADD], the adding indicator lamp will light up to indicate the scale is under adding mode.
The scale display will indicate „Add01" (for some models the message will be divided into two
windows e.g.: the scale display will show „Add", the unit price display will indicate „01"), and the total
price display will indicate „7.50" (EUR or USD).
3) Remove the goods A and wait for that the scale returns back to the weighing mode (wait for 2 seconds
or press [ADD]);
EN
Publicité
