Publicité
ASSEMBLY STEP 2
NOTE: Be careful not to pinch
any wires while attaching the
console mast.
A
B
5
D
C
2
B
HARDWARE FOR STEP 2
PART
A
B
SPRING WASHER
C
FLAT WASHER
D
ARC WASHER
E
A
Slide CONSOLE MAST GROMMET (5) from bottom
up the CONSOLE MAST (4).
B
Attach LEAD WIRE to bottom end of CONSOLE
4
CABLE. Pull LEAD WIRE through CONSOLE MAST
(4). After pulling the lead wire through the mast, the
top of the CONSOLE CABLE should be located at
the top of the mast.
C
Slide CONSOLE MAST (4) into MAIN FRAME (2) using
2 BOLTS (A), 4 WASHERS (B&D) from side and 2
BOLTS (E), 4 WASHERS (B&C), from front side.
D
Slide CONSOLE MAST GROMMET (5) down over
MAIN FRAME (2).
E
A
TYPE
DESCRIPTION
BOLT
M8
Ø8.0
Ø8.0
Ø8.0
BOLT
M8
B
C
D
E
QTY
2
4
2
2
2
7
Publicité
