Publicité
To start cooking
Put the food into a cookware and position it on the
centre of the circular design on the plate.
NOTE:
•
A lid must be used when cooking.
•
Never place empty cookware on the appliance, when the appliance is
switched on.
•
Make sure the bottom of the pan and the surface of the cooking zone are
clean and dry.
1. Plug in the hob.
•
The buzzer will beep once and all the indicators will light up for 1 second
then go out, indicating that the hob has entered the standby state.
2. Touch and hold
•
A beep will sound and all the indicator lights will
show "—" or "— —".
•
If no button is touched within 1 minute, the hob will
automatically switch off.
3. Touch the desired cooking zone control key.
•
The number "5" next to the key will flash.
4. While the number "5" is flashing, set the power level by
repeatedly touching
•
You can touch and hold
Release the button when the desired power level
is set.
•
To change the power level during cooking, touch the cooking zone and
84
VH20T2.indd 84
VH20T2.indd 84
for about 2 seconds.
or
.
or
FR
NL
for fast setting.
EN
PT
13/5/2024 4:52 PM
13/5/2024 4:52 PM
Publicité
