Publicité
3 DISASSEMBLING THE PINLOCK
INNER VISOR
3.1
DISASSEMBLE
EQUIPPED WITH THE PINLOCK® inner
visor (see instructions
above).
3.2 Widen the visor and release the
PINLOCK® inner visor from the pins
(Fig.11).
3.3 Release the visor.
4 MAINTENANCE AND CLEANING
- Disassemble the PINLOCK® inner visor
from the visor. Using a damp and soft
cloth, gently clean it with mild liquid soap.
Remove all soap under running water.
- Leave the visor to dry in warm and dry air
without wiping it.
- To preserve the visor's condition over
time, leave the helmet to dry in a venti-
lated and dry place with the visor open
after use. Keep it away from heat sources
and store it in a place away from direct
light.
- Do not use solvents or chemical pro-
ducts.
VISION PROTECTION SYSTEM (VPS)
(VP-17S OU VPS-17L, DEPENDING
ON HELMET SIZE)
The exclusive inner VISION PROTECTION
SYSTEM (VPS) is a LEXAN™ (*) polycarbo-
nate moulded sunscreen with scratch-re-
sistant / fog-resistant treatment. It is very
simple and practical to use: just lower it
to activate it or lift it to remove it from
your field of vision. It is useful in all sorts
of situations, both on long journeys out of
town and shorter town trips.
Moreover, the fastening system allows you
to assemble and disassemble the suns-
creen for ordinary maintenance and clea-
ning, using no tools..
1 OPERATION
The VPS mechanism allows you to acti-
vate the sunscreen by simply lowering it
until the visor field of vision is partially
covered. In this way, the light transmit-
tance is reduced as desired.
12
(*) LEXAN is a trademark of SABIC.
®
At any time, without operating the visor,
the VPS can be deactivated with a simple
THE
VISOR
movement and easily lifted up to restore
the normal conditions of visibility and
protection
guaranteed by the approved helmet visor.
1.1 To activate the VPS, move the slider as
in Fig.12 until you hear a click that means
that the VPS is in the desired position.
The VPS is adjustable in a range of inter-
mediate positions to ensure the best
comfort for the user with respect to the
terms of use.
1.2 To deactivate the VPS, press the reco-
very button as shown i n Fig.13 until the
VPS unlocks and moves automatically in
Fig. 11
standby position.
2 PRECAUTIONS FOR USE
Current homologation standards (ECE22-
06) establish that the minimum light trans-
mittance levels of visors should be no less
than 80%; for homologated sunscreens,
the minimum transmittance level should
be no less than 20%.
This regulation also provides for the simul-
taneous use of the visor and sunscreen,
both as standard.
with the homologated standard visor,
which has a transmittance value greater
than 80%.
WARNING: We recommend you to
use the VPS only and solely together
Fig. 12
Fig. 13
Publicité
