Publicité
17 SAFETY
Only use the machine in a technically perfect condition and in accordance with its intended use, safety-
conscious and aware of the dangers! Have faults which could impair safety rectified immediately!
Intended use of the machine
17.1
The machinery is intended exclusively for the following activities:
For splitting wood in grain direction, with dimensions within the limits specified in the "Technical data"
section.
The splitting process of the machine is intended for operation by only one person.
ZIPPER MASCHINEN assumes no responsibility or warranty for any other use or use be-
yond this and for any resulting damage to property or injury.
17.1.1 Technical Restrictions
The machine is intended for use under the following conditions:
Rel. humidity:
Temperature (Operation)
Temperature (storage, transport)
17.1.2 Prohibited Use / Hazardous misapplications
-
Operation of the machine without adequate physical and mental aptitude
-
Operating the machine without knowledge of the operating instructions
-
Changes in the design of the machine
-
Operating the machine under explosive conditions
-
Operating the machine outside the specified power range
-
Remove the safety markings attached to the machine.
-
Modify, circumvent or disable the safety devices of the machine.
The non-intended use or the disregard of the explanations and instructions described in this manual will
result in the expiration of all warranty claims and compensation claims for damages against ZIPPER
MASCHINEN GmbH.
Safety instructions
17.2
Warning signs and/or stickers on the machine which are illegible or have been removed must be
replaced immediately!
Local laws and regulations may determine the minimum age of the operator and restrict the use
of this machine.
In order to avoid malfunctions, damage and adverse health effects, the following additional measures
for safe working must be observed UNCONDITIONALLY:
Do not split soaked wood.
•
Only split the wood horizontally in the direction of the grain!
•
•
Do not split wood that contains foreign objects such as nails, cables, etc.
Never operate the machine outdoors in the rain.
•
•
Choose a level, vibration-free, non-slip surface as the installation location.
Ensure sufficient lighting conditions at the workplace.
•
•
Keep the working area free of obstacles (e.g. pieces of wood, leftover wood, etc.).
Before each use, check the machine for its perfect condition (tight fit of hoses and screws,
•
operability of the switch-off devices, etc.).
Never leave the running machine unattended.
•
•
The machine may only be operated, serviced or repaired by persons who are familiar with it
and who have been informed of the dangers arising during this work.
•
Although it is possible that several operators could work on the machine (e.g. for loading and
unloading), only one person should ever operate the splitting process.
•
As the operator of the machine, make sure that unauthorised persons maintain an appropriate
safety distance from the machine and, in particular, keep children away from the machine.
•
Wear suitable work clothing (eye protection, work gloves, safety shoes and close-fitting work
protective clothing, never loose clothing, ties, jewellery, etc. - danger of being drawn in!
•
Keep your hands away from crevices and cracks that open in the wood.
Do not reach into the splitting area.
•
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
ZI-HS5TN, ZI-HS7TU
NOTICE
max. 50 %
+5° C bis +40° C
-25° C bis +55° C
SAFETY
25
Publicité
