Publicité
Features
Fig. 48
u Pull bottle fingers away upward for removal.
8.3 Shelves
8.3.1 Repositioning / removing shelves
Pull-out stops secure the shelves against being accidentally
pulled out.
Fig. 49
u Lift the shelves and pull to the front.
w Side recess to support position.
u Repositioning the shelves: Lift up or lower to the desired
height and insert.
-or-
Fig. 50
u Removing the shelf completely: Pull out to the front.
u Easier removal: Angle the shelf.
u Reinserting the shelf: Push it in to its stop limit.
w The pull-out stops are pointing down.
w The pull-out stops are behind the front shelf.
You can also remove the shelves above the KeepFresh
drawers.
Fig. 51
Removing the shelf:
u Lift the shelf at the front and rear.
u Remove from the front.
Do not place any goods on the compartment lid below.
Sliding the shelf in:
82
u Place the shelf at an angle, with the back tilted down‐
ward.
w The pull-out stops are pointing down.
u Slide the shelves into place.
8.3.2 Disassembling the shelf
The shelves can be disassembled for cleaning.
Fig. 52
u Disassemble the shelf.
8.4 Divisible shelves
8.4.1 Using the divisible shelves
Pull-out stops secure the shelves against being accidentally
pulled out.
Fig. 53
u Push the divisible shelves underneath as in the illustra‐
tion.
Fig. 54
Adjusting the height:
u Pull the shelves out Fig. 54 (1) to the front one by one.
u Pull the support rails out of the catch mechanism and
engage them in place at the desired height.
u Insert the shelves one after the other.
w Flat pull-out stops at the front, right behind the support
rail.
w High pull-out stops at the back.
Using both shelves:
u Hold the bottom shelf with one hand and pull it to the
front.
w The shelf Fig. 54 (1) with the trim strip is at the front.
w The stops Fig. 54 (3) point downward.
Appliances with freezer compartment:
u Do not place shelf rails and divisible shelves in front of
the fan.
* Depending on model and options
Publicité
