Controls
Room temperature of the installation site
-
-
Type, temperature and quantity of food
Temperature zone
Factory-set
temperature
5 °C
Fridge section
Setting the temperature
Fig. 10 Example illustration
u Carry out action steps according to the illustration.
w Temperature is set.
FreezerLevel
Use this function to set the FreezerLevel. You can use the
FreezerLevel to make the **** freezer compartment slightly
warmer or colder. The FreezerLevel is pre-set to value 5 as
delivered.
Value Description
1 to 4 **** freezer compartment gets colder.
5
Pre-set value
6 to 9 **** freezer compartment gets warmer.
Setting the FreezerLevel
Fig. 11
Fig. 12 Example illustration: Switch from value 5 to value 6.
u Carry out action steps according to the illustration.
w The FreezerLevel is set.
76
Recommended
Use this function to activate or deactivate the quick cooling.
setting
If quick cooling is activated, then the appliance increases
the cooling capacity. It allows you to achieve lower cooling
4 °C
temperatures. You can activate quick cooling when you
would like to cool a large quantity of food quickly.
If quick cooling is activated, then lower temperatures are
reached in the **** freezer compartment. You can activate
quick cooling when you would like to freeze food in the ****
freezer compartment.
If the function is active, the appliance operates at higher
power. As a result, the appliance's operating noise may be
temporarily louder and energy consumption will increase.
Activating the quick cooling
Time for activation of the function:
When you would like to store fresh food in the fridge
-
section: Activate the function when inserting food.
When you would like to store fresh food in the
-
**** freezer compartment: Activate the function when
inserting food.
Fig. 13
Fig. 14
u Carry out action steps according to the illustration.
w Quick cooling is activated.
Deactivating the quick cooling
The quick cooling is automatically deactivated after
18 hours. However, you can also deactivate quick cooling
manually at any time:
Fig. 15
Fig. 16
u Carry out action steps according to the illustration.
w Quick cooling is deactivated.
w The appliance continues to run in normal mode.
w The appliance cools to the temperature set previously.
Quick cooling
* Depending on model and options