Publicité
Controls
Fig. 39
u Carry out action steps according to the illustration.
w Demo mode is activated.
w Appliance is switched off.
u Switch on the appliance. (see 4.1 Switching on appliance
(first use))
w "DEMO" appears in the status display.
Deactivating demo mode
Fig. 40
80
Fig. 41
u Carry out action steps according to the illustration.
w Demo mode is deactivated.
w Appliance is switched off.
u Switch on the appliance. (see 4.1 Switching on appliance
(first use))
w Appliance is reset to factory settings.
Resetting to factory settings
Use this function to reset all settings to factory defaults.
All settings you have made so far are reset to their original
settings.
Performing a reset
Fig. 42
Fig. 43
u Carry out action steps according to the illustration.
w Device is reset.
w Device is switched off.
Note
To reset to factory settings in battery mode: Restart is only
possible with mains voltage.
u Restart the device. (see 4.1 Switching on appliance (first
use))
7.3 Messages
There are two categories of messages:
Category Importance
Warning
Warnings appear in the event of a door alarm or
malfunction.
Simple warnings can be cancelled by yourself.
In the event of serious malfunctions, you must
contact customer service. (see 10.4 Customer
Service)
Reminder Reminders remind you of general processes.
You can carry out these operations to end the
message.
7.3.1 Overview of warnings
Behaviour of the appliance in the event of warnings:
Warning appears on the display.
-
The alarm tone sounds at an ever-increasing volume.
-
-
The interior lighting pulsates for some warnings.
* Depending on model and options
Publicité
