Publicité
To enable or disable the enclosure safety feature, complete the
following steps:
1. Press
for three seconds.
2. Press
to scroll down to Settings. Press
3. Choose Enclosure Safety Mode. Press
4. Use
to toggle between disable or enable Enclosure
Safety mode.
5. Press
to exit the menu.
Screen standby time
Standby mode can be adjusted to the following times:
(15 minutes, 1 hour, 6 hours or 12 hours).
To select a new standby time, complete the following steps:
1. Press
for three seconds.
2. Press
to scroll down to Settings. Press
3. Press
to scroll to Screen Standby. Press
4. Press
to scroll to desired standby time. Press
5. Press the
to exit the menu.
Blend Cycle Pause setting
When in automatic mode, the Blend Cycle Pause setting allows
the user to pause and resume a blend cycle at the same time
and speed. To enable or disable the Blend Cycle Pause feature,
complete the following steps:
1. Press
for three seconds.
2. Press
to scroll down to Settings. Press
3. Press
to scroll to Blend Cycle Pause. Press
4. Use
to toggle between disable or enable Blend Cycle Pause.
5. Press
to exit the menu.
Language
The menu is available in three languages: English, French,
and Spanish. To select a language, complete the following steps:
Press
for three seconds to enter the menu.
1. Press
to scroll down to Settings. Press
2. Press
3. Press
4. Press
.
3.1.9 BLENDER STATISTICS
to select.
Blend cycle counts
To review the total of cycles run on the unit and the number of
cycles run on each button:
1. Press
2. Press
3. Press
4. Press
Note: The pulse count refers to pulse sets. For example, touching the
pulse button 5 times in a row will register as 1 pulse count. Touching
.
the pulse button, then a cycle number and then the pulse button will
to select.
register as 2 pulse counts.
to select.
Diagnostic error log
To review the diagnostic errors that have been logged on
the blender.
1. Press
2. Press
to select.
3. Press
4. Press
.
to select.
Note: When the Blend Cycle Pause setting is enabled, a cycle can be
paused by pressing any button. If the Blend Cycle Pause function is
disabled, pressing any button will stop a blend cycle.
to select.
to scroll to Language. Press
to scroll to desired language. Press
to exit the menu.
for three seconds to enter the menu.
to scroll down to Cycle Counts. Press
to scroll through Cycle Counts.
to exit the menu.
for three seconds to enter the menu.
to scroll down to Diagnostic Counts. Press
to scroll through error counts.
to exit the menu.
to select.
to select.
to select.
7
Publicité
