Télécharger Imprimer la page

Blendtec COMMERCIAL Serie Manuel D'utilisation page 10

Masquer les pouces Voir aussi pour COMMERCIAL Serie:

Publicité

Exporting blender statistics
Exporting blender statistics (cycle counts, errors, settings and
firmware versions is a way to save diagnostic information, which
Blendtec
's customer service and repair experts will use if
®
problems arise with the unit.
To export blender statistics to a USB drive, complete the
following steps:
1. Use a #1 Phillips screwdriver to remove the USB cover at the
top of the right side of the blender.
2. Plug the USB drive into the blender's USB port.
Note: If the blender is in manual or automatic operation mode, the
USB flash drive menu will automatically load on the screen. If the
blender is in programming mode, go to the main menu and select
USB Drive.
3. Press the
to Export Counts. Press
again to confirm export of counts to the sth-cnts.csv file.
4. After the export process is finished, remove the USB drive
from the blender and secure the cover on the USB port with
a #1 Phillips screwdriver.
8
to select. Press

Publicité

loading

Ce manuel est également adapté pour:

Cqb1 stealth 885Iqb1 stealth 885Cqb2 stealth nitroCqb3 stealth xCqb3 stealth nitro xIcb5 connoisseur 825 ... Afficher tout