Publicité
3.1.3 STEALTH® MODEL INTERFACE
Scroll
Power
Preprogrammed Cycle Buttons
Preprogrammed Cycles
Preprogrammed cycles run at varying speeds and durations, and
automatically stop. To start a cycle, press any preprogrammed
button. Press any cycle again to end that cycle, or press
to pulse. For slower pulse speeds, hold any preprogrammed
cycle button. To program different cycles, see section 3.1.5 of this
manual.
3.1.4 ADVANCED PROGRAMMING AND DIAGNOSTICS
Menu Navigation Tips
Touch and hold
for three seconds to enter the menu.
1. Use the
to scroll and the
2. To return to the main screen from any submenu area, tap the
until the main screen appears.
3.1.5 SELECTING THE DESIRED PROFILE
1. Press
for three seconds to enter the menu.
2. Press
to select 'profiles'.
3. Press
to scroll.
4. Press
to select desired option.
5. Press
again to activate profile. To cancel selection, press
6
Select
Cancel/Exit
Pulse
. Hold
to select the desired function.
3.1.6 CHANGING PREPROGRAMMED CYCLE BUTTONS
Temporarily change cycle buttons
1. Press
for three seconds to enter the menu.
2. Press
to scroll down to Blend Cycles, then press
3. Choose Standard Blend Cycles or Custom Blend Cycles.
4. Choose the desired blend cycle.*
5. Select the button to use for this blend cycle change, then
press
. To cancel selection, press
*To temporarily disable a button, select "Disable button" at this step.
Note: After customizing a cycle to a number button, an asterisk
appears after the profile name when returning to operation mode.
Loading a new profile on the blender will reset the profiles back to
default cycle buttons.
Permanently change cycle buttons
To permanently change the cycle buttons in a profile, export
the revised profile to a USB drive and import the profile on the
blender, or use Blend Wizard
3.1.7 BLEND WIZARD
In addition to using the profiles and cycles preprogrammed on
the blender, Blend Wizard
and cycles. For instructions on using Blend Wizard
develop custom profiles and cycles, visit my.blendtec.com.
3.1.8 BLENDER SETTINGS
Blender settings can be changed for optimal blending
performance and functionality.
Enclosure Safety mode
The enclosure safety feature provides a prompt to ensure the
.
sound enclosure lid is closed during motor operation. It will
also turn off the motor if the sound enclosure is raised during
blending. This feature cannot be disabled for the Stealth
NBS
model.
®
.
.
TM
TM
can be used to create custom profiles
TM
to easily
TM
.
895
®
Publicité
