Blendtec COMMERCIAL Serie Manuel D'utilisation page 14

SECTION 4
CARE & CLEANING
4.1 CLEANING AFTER USE
1. Add 1 cup (240 ml) warm water and 1-2 drops of liquid dish
soap to the blender jar.
2. Place the lid tightly onto the jar, place the jar on the motor
base and press and hold the pulse button for 5-10 seconds.
3. Remove and rinse with warm water.
4.2 LONG-TERM SANITATION
1. Sanitize the jar per local code by filling the blender jar with
a sanitizer diluted to the manufacturer's specifications.
2. Leave the diluted sanitizer in the jar for five minutes.
3. Empty the sanitizer from the jar.
4. Rinse jar thoroughly with water.
4.3 MOTOR BASE AND SOUND ENCLOSURE CLEANING
1. Ensure the blender is unplugged before cleaning.
2. Wipe down the plastic housing of the motor base, gaskets,
metal top, and sound enclosure with a clean, damp rag. A mild
all-purpose, nonabrasive cleaner may be used.
3. The drive socket can be cleaned by using a cotton swab or a
toothpick
4.4 CLEANING TIPS AND CAUTIONS
1. Do not use stiff bristled brushes or abrasive cloths/pads to
clean the blender base, jar or sound enclosure as this will dull
or scratch the surface.
2. Do not use a water jet of any kind to clean the motor base.
3. NEVER submerge the motor base in water. Doing so will void
the warranty.
12