Publicité
11
SAFETY
This section contains information and important notes on safe start-up and handling of the
machine.
For your own safety, read these operating instructions carefully before putting the
machine into operation. This will enable you to handle the machine safely and prevent
misunderstandings as well as personal injury and damage to property. In addition,
observe the symbols and pictograms used on the machine as well as the safety and
hazard information!
11.1
Intended use of the machine
The machinery is intended exclusively for the following operations: for grinding knives, scissors and
tools out of steel within the specified technical limits.
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
11.1.1
Technical restrictions
The machine is intended for use under the following ambient conditions:
Rel. Humidity:
Temperature (Operation)
Temperature (Storage, Transport)
11.1.2
Prohibited applications / Hazardous misapplications
-
Operating the machine without adequate physical and mental fitness.
-
Operating the machine without knowledge of the operating instructions.
-
Changes to the design of the machine.
-
Operating the machine near flammable liquids, vapours or gases.
-
Operating the machine outside the technical limits specified in this manual.
-
Remove the safety markings attached to the machine.
-
Modify, bypass or disable the safety devices of the machine.
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
11.2
User requirements
The machine is designed for operation by one person. The physical and mental aptitude as well as
knowledge and understanding of the operating instructions are prerequisites for operating the
machine. Persons who, because of their physical, sensory or mental abilities or their inexperience
or ignorance, are unable to operate the machinery safely must not use it without supervision or
instruction from a responsible person.
Please note that local laws and regulations may determine the minimum age of the operator
and restrict the use of this machine!
Put on your personal protective equipment before working on the machine.
Work on electrical components or equipment may only be carried out by a qualified electrician
or under the instruction and supervision of a qualified electrician.
11.3
General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, the following
points must be observed in addition to the general rules for safe working:
Before start-up, check the machine for completeness and function.
Choose a level, vibration-free, non-slip surface for the installation location.
Ensure sufficient space around the machine!
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
Ensure a clean working environment.
Only use perfect tools that are free of cracks and other defects (e.g. deformations).
Remove tool keys and other adjustment tools before turning on the machine.
Keep the area around the machine free of obstacles (e.g. dust, chips, cut parts, etc.).
Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorised restart.
The machine may only be operated, maintained or repaired by persons who are familiar with it
and who have been informed of the dangers arising in the course of this work.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O T E
max. 65 %
+5° C to +40° C
-20° C to +55° C
SAFETY
18
NTS250S_230V
Publicité
