Publicité
VIA MOBILE APPLICATION
7.3
Pairing the heat pump
Step 1:
Now start the pairing.
Choose your home WiFi network, enter the WiFi password and press
"Confirm".
WARNING : The «Smart Life» application only supports
2.4Ghz WiFi networks.
If your WiFi network uses the 5GHz frequency, go to the interface of
your home WiFi network to create a second 2.4GHz WiFi network
(available for most Internet boxes, routers and WiFi access points).
Step 2:
Activate the pairing mode on your heat pump.
When the heat pump is switched off, press
seconds to start WiFi pairing. The WiFi logo will flash.
If there is a pairing problem, or if the heat pump is out of range of your wifi, you
will need to use a wifi amplifier or relay (not supplied).
The pairing is successful, you can rename your Poolex heat pump then press "Done".
Congratulations, your heat pump can now be controlled from your smartphone.
76 | EN
7. USE
and
for 5
Publicité
