Télécharger Imprimer la page

Super Ego SE 415-4 Instructions D'utilisation page 19

Publicité

Transportation
It is necessary to drain off the oil for transportation.
1. Insert a short pipe and close the chuck firmly.
2. Grip the pipe with the cutter for fixing the carriage,
and carry according to the diagram below.
Short pipe
Setting up
1. Mount the legs. Ensure that they have been
properly inserted in their housing and fixed using
screws.
2. When setting up the machine, the legs should be
adjusted ensuring that the rear chuck is higher
than the hammer chuck so that oil does not flow
back down the pipe being threaded.
Rear chuck
3. Add Rothenberger threading oil (the threading
result cannot be guaranteed if using any other oil).
4. Remove the swarf tray and check that the oil level
adequately covers the filter.
5. Mount the tank upper cover in the correct position.
MACHINE PREPARATION
Cutter
Carriage
Figure 2
Hammer chuck
Figure 3
NPT/BSPT 2.1/2" – 4" Taper threads
1. Interlock plate IN
2. Disengage foot IN
3. Sinusoidal bar hook (Disengaged)
4. Die Head Foot ON Sinusoidal Bar (HOOKED)
Setting the Self-opening Die Heads for NPT or BSPT threads
Figure 4
NPSM/BSPP 2.1/2" – 4" straight threads
1. Interlock plate OUT
2. Disengage Foot OUT and LOCKED
3. Sinusoidal Bar Hook (DISENGAGED)
4. Die Head Foot OFF Sinusoidal bar (Hooked)
Setting the Self-opening Die Heads for NPSM or BSPP
Figure 5
threads
ENGLISH
19

Publicité

loading

Ce manuel est également adapté pour:

15000014851500001486150000286515000015891500001591