Publicité
purpose. Work according to the capacity of
the main unit in order to guarantee safe and
efficient operation. Excessive force could
not only damage the product but also cause
accidents.
• Do not use the machine in any way that could
cause the motor to lock or cause smoke or fire.
11. Wear close-fitting clothing.
• Do not wear ties, garments with open sleeves,
loose garments, accessories such as necklaces,
etc., which could get caught in rotating parts.
• When working outside it is recommended to
use rubber gloves and shoes with studs. Slippery
gloves and footwear can lead to injuries.
• Cover long hair with a cap or net to prevent it
from becoming caught in rotating parts.
• Wear a safety helmet, safety footwear, etc. in
accordance with the working environment.
12. Do not work in an unnatural posture.
• Keep a firm footing and balance to avoid falling
and injury.
13. Remove tools such as spanners.
• Before putting the switch to the ON position,
check that the inspection and adjustment tools
have been removed.
• The operation of the machine whilst tools are
inside could cause accidents and injury.
14. Operate the machine with extreme care.
• Always work by paying great attention to the
handling of the machine, the working methods
and the surrounding conditions. Carelessness
could result in accidents and injury.
• Do not work with the machine if you have low
concentration levels such as when you are tired,
after consuming alcohol, whilst ill, under the
effects of medication, etc.
15. Do not handle the power supply cable
inappropriately.
• Do not carry the product by the cable or pull on
the cable to disconnect it.
• Do not place the cable close to hot objects,
grease and oils, scissors or sharp objects.
• Do not stand on the cable, pull it or apply
excessive force which could damage it. This
could cause an electric shock or short-circuit
leading to fires.
16. Carry out maintenance on a daily basis.
• Follow the instruction manual when changing
accessories and parts.
• Periodically inspect the power supply cable and
plug. If damaged, call the distributor or the sales
division for repair.
• It you use an extension cable inspect it
16
SEGURIDAD
• If you use extension cables outside, use those
• Keep parts used for gripping dry and clean and
17. Check that there are no damaged parts.
• Before using the machine, carefully check for
• Check that there are no anomalies in the
• Do not use the machine if the start and stop
• Follow
18. Store the machine properly when not in use.
• Store it in a dry place out of the reach of children
19. For general maintenance and repairs call an
authorised distributor.
• Our product complies with the relevant safety
• Bear in mind that for any repair you must contact
20. The machine must always be moved by two people.
21. Always work with sufficient light.
• This could otherwise lead to accidents or injury.
Threading Work
1. Take care when handling blades and other sharp
objects.
• To prevent accidents and injury, take special care
when handling blades and other sharp objects
such as the dies, reamers, pipe cutters and carbide
cutters, etc.
2. Do not place your hands or face close to rotating
parts while the machine is operating.
• Inserting your hands into rotating parts and dies
will result in serious accidents and injury.
3. Do not perform the next operation until the machine
has stopped rotating completely.
• Rotation does not come to a complete standstill
when you turn the switch to OFF.
ENGLISH
periodically and change if damaged.
intended for outdoor use to avoid electric
shocks, short-circuits or fire.
free from oil and grease. If they are slippery
injury could result.
damage to the protection parts and other parts
and check normal operation of the machine and
its functions.
adjustment of movable parts, tightening, damaged
parts and other parts which affect operation.
switches do not work.
the
instruction
replacement or repair of guards and other parts.
If you cannot find instructions in the instruction
manual call the distributor or our sales division
for the repair.
and locked with a key.
standards. Do not remodel the machine.
the distributor or our sales division. If repairs are
carried out by unqualified or unskilled personnel,
the operation of the machine will be compromised
which could lead to accidents or injury.
manual
for
the
Publicité
